Here are two of the many we get:

Too many in this hobby spend a lot on equipment but don't pay attention to 2 critical things; room treatment and setup. Setup is especially important with a turntable and cartridge. Brian has the knowledge, experience and equipment to do it right. His process is thorough and precise. He can show you detailed measurements on his computer and you will hear an amazing difference when he is done. His efforts resulted in a huge improvement in sound quality, I would recommend Brian if you are serious about getting the best from your vinyl rig. A real bargain.
- Ed

Brian was here today resetting up my VPI HRX with a Benz LPS cartridge. Unless you have the tools and knowledge, I would strongly recommend having Brian set up your turntable, arm and cartridge. This was the best investment I made for my turntable.
- Steve

Let me bring the same joy to your listening experience.


The Ultimate Phono Cartridge Setup

Because you deserve the best

Are you getting the most out of your turntable?

Be confident that it is set up right.


Optimum performance from a turntable system is achievable through the following means:

  • Leveling the turntable
  • Setting the overhang and offset angle correcly for best tracking and minimum groove noise
  • Setting the correct tracking force
  • Setting the stylus rake angle (SRA) for best phase and frequency response
  • Adjusting the azimuth for minimum phase error and low crosstalk
  • Adjusting the antiskating force for minimum tracking error
  • Adjusting the platter rotational speeds correctly, accounting for stylus drag
  • Measuring other performance parameters to understand the cartridge and tonearm's characteristics

Call me so you can experience your music as never before.



No thoughts on “Home page main module”



Ready to realize your system's full potential?



Go To Top